AirThunder recommend Bantam balance charger.
Please download and review
the manual for details.
This charger comes with balance adapter for AirThunder
batteries and adapter for Thunder Power/Flight Power batteries.
The AirThunder adapter also works with Align, Apogee, E-Flight and ElectricFly
batteries. PolyQuest
or Kokam
style adapters or open-end
harness are availabe in place of the AirThunder or Thunder Power style
adapters upon request. Email us after you place the order to let us know.
Note: you'll need to connect the balance tap and the
voltage wires to the Bantam charger while charging. Otherwise, you'll get a
"CONNECTION BROKE" error message.
Click here to download user's manual.
|
Specification
|
|
Operating voltage
|
DC 11~18 volts
AC 100~240V, 50/60Hz
|
|
Charge/discharge power
|
max. 50/5 Watts
|
|
NiCd/MH
|
1~15 cells
|
|
LiIo/LiPo/LiFe
|
1~6 series
|
|
Pb
|
2~20V
|
|
Charge current
|
0.1 to 5.0A
|
|
Discharg current
|
0.1 to 1.0A
|
|
No. of cycle
|
1 to 5 times
|
|
Battery data memory
|
up to 5 data
|
|
Weight
|
960g
|
|
Dimension
|
160x120x40 mm
|
|
User's setting-up parameters
|
|
Lithium battery voltage type
|
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
|
|
NiCd Delta-peak voltage
sensitivity
|
5 to 20mV
|
|
NiMH Delta-peak voltage
sensitivity
|
5 to 20mV
|
|
Battery temperature cut-off
|
20 to 80C or OFF
|
|
Waste time between
charge/discharge
|
1 to 60 min.
|
|
Integral timer limit for safety
|
10 to 720 min.or OFF
|
|
Maximum charging capacity limit
for safety
|
10 to 9990mAh or OFF
|
|
Key beep and buzzer sound
|
ON/OFF
|
|
Input
DC power low alert
|
10 to 11V
|
- Optimized operating software
When charging or discharging, BC6 has an
'AUTO' function that sets the feeding current or the cell count of Lithium
battery automatically. Especially for Lithium batteries, it can prevent the
over-charging can lead to an explosion by users fault. Every program in the
unit is controlled with mutual links and communication for every possible error
so it introduces a maximum safety. These can be set at users option.
- Dual input power
BC6 employs the circuit that can be
operated with the input power of AC(Alternating Current) or DC(Direct Current).
For AC input, it contains a AC-DC switching power supplier which has 5A of
power capacity and maximum output power of 50Watts for charging. As a result it
can charge up to 15 cells of NiCd/NiMH , 3 series of Lithium batteries with
maximum current of 5.0A, and 6s series of Lithium batteries with maximum
current of 2 A..
- Individual voltage balancer for Lithium batteries inside
BC6 has an individual-cell-voltage balancer
inside. So it does not need any balancer separately when charging Lithium
batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
** When the 'Balance charge' mode being performed, the balancing
adapter should be connected to the balancing tab of battery pack, as well as
the charger's charging lead should be connected to the output of battery pack.
And also, please pay attention to the polarity of the battery pack's
output which goes to the charger's output. If it is reversed, the short-circuit
can be happened on the battery pack.
- Balance individual cells on discharge
BC6 also can monitor and balance individual
cells of the Lithium battery pack during the discharge process. If the voltage
of any one cell varies abnormally, the process will be stopped with the error
message.
- Accept various types of Lithium battery
BC6 can accept three types of Lithium
batteries - LiIo, LiPo and LiFe. They have different characteristics by their
chemistry. You can select any one of them that you are going to process before
the job.
- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special
purposes. 'Fast' charge reduces the charging time of Lithium battery and
'Storage mode controls the final voltage of the battery to be suit for long
time storage.
- Data store/load
For users convenience it can store maximum
5 data of different batteries. You can establish the data contains program
setting of the battery to charge or discharge continually. These data can be
called out at any time you need and the process can be executed without program
setting.
- Cyclic charging/discharging
Perform 1 to 5 cycles of
charge>discharge or discharge>charge continually for battery refreshing
and balancing.
- Robust outer aluminum case
High-quality aluminum case is durable and
very efficient to cool out the internal heat